Asphalt Cost Calculator
Estimate the material cost of your asphalt project based on current US price ranges. For total project cost including labour, base preparation and removal, use the line-item breakdown below.
Typical Asphalt Cost Components
| Cost Item | Range (US, 2026) | Notes |
|---|---|---|
| Hot mix asphalt (delivered) | $100–$200 / ton | Varies by region, oil, mix |
| Site preparation | $1–$3 / sq ft | Higher for slopes or wet sites |
| Aggregate base course | $1.50–$3 / sq ft | Depth-dependent |
| Tear-out & disposal | $1–$3 / sq ft | For reconstruction |
| Labour & equipment | $1.50–$4 / sq ft | Largest variable |
| Mobilization | $500–$1,500 flat | Per project |
Rules of Thumb for Total Project Cost
- New driveway (full build): $7–$13 per sq ft installed.
- Driveway overlay: $3–$6 per sq ft.
- Commercial lot (4 in): $4–$9 per sq ft installed.
Why Quotes Vary So Much
Asphalt is a commodity tied to crude oil, but installation is a local service. The same job can quote very differently across regions — driven by labour cost, plant proximity, season and base requirements. Get at least three quotes for any significant project.